Raleigh 866.342.7665 /Concord 800.311.2734 /Ashland 804.365.5144 /Chesapeake 757.819.9116

DJI Zenmuse Z15-GH4

  • DJI Zenmuse Z15-GH4 For Panasonic GH4
  • Built for the Panasonic GH4/GH3
  • Another Evolutionary 3-axis Professional HD Gimbal
  • HDMI-HD/AV Module
  • 3-axis Rotation Control
  • A Total Solution
  • Multiple Control Modes
  • Gimbal Servo Drive Module
  • Built-In Independent IMU Module
  • sale
    36% off
  • $1599.00
Old price: $2499.00 , you save $900.00
  • 36% off
In stock (4 items available)
  • Weight
    5.1000 lbs
  • SKU

DJI Zenmuse Z15-GH4
For Panasonic GH4


Another Evolutionary 3-Axis Professional HD Gimbal

The DJI Zenmuse Z15-GH4 (HD) gimbal, an upgraded version of the popular Zenmuse Z15-GH3, represents a breakthrough in Zenmuse precision, offering a control range of just ±0.01°. When used with a DJI professional aerial system, your Panasonic GH4/GH3 remains stable and under control even in strong winds and during intense maneuvers.



Each Zenmuse is guaranteed to deliver nothing short of the best in camera control and stabilization. The Zenmuse Z15-GH4 (HD) is built specifically for the the Panasonic GH4 and GH3, so either camera fits perfectly in the gimbal. The Panasonic GH4 is known for its digital film quality images and small body, making it ideal for aerial cinematography and photography. The Zenmuse Z15-GH4 (HD) gimbal connects with your GH4 through a standard HDMI cable, but if you are using a Panasonic GH3 with the gimbal, please use the included GH3 HDMI cable.



  • For Panasonic GH4/GH3 Cameras
  • Provides 360° Camera Rotation
  • Provides +50° / -140° Tilt
  • Provides up to ±40° Roll
  • Supports HD Transmission via Lightbridge
  • Integrated IMU Module
  • Remote Shutter Release Operation
  • Three Selectable Control Modes
  • Requires Olympus 12mm f/2.0 Lens
  • For Octo-Rotors Such as S1000 and S900


*Note: Does Not Include Camera.


The Zenmuse Z15-GH4 (HD) is ideal for the S800 EVO, S900 and S1000 flight platform and works with other DJI products including the A2 and WooKong-M multirotor flight controllers. Used with the DJI Lightbridge HD digital video downlink or an iOSD Mark II and a 5.8G video link, it is a Total Solution for aerial photography and cinematography. 


The HDMI-HD/AV Module for Zenmuse Z15-GH4 Gimbal from DJI is a circuit board that provides the connection point for the HDMI signal from the camera.


The 3-axis Zenmuse Gimbal system’s creative mechanical design makes control through the transmitter stick both intuitive and easy. Its internal slip rings avoid complicated wiring. Both power and signal lines have been integrated into gimbal’s tubes, resulting in a completely unhindered control axis that offers a maximum yaw of ±360°, pitch of +50°/-140° and a roll of ±40°. 


Three camera control modes are offered to maximize creativity and ease of flight. Orientation-locked, Non Orientation-locked and Back to Mid-point (Horizontal). All three modes can be switched between, quickly and easily in line with the needs of each shoot.


What gives every Zenmuse its precision is our specially designed Gimbal Servo Drive Module. Each of these is tailored to the weight and balance of the camera it has been designed to move. This significantly improves control and stability, maximizes torque, while minimizing vibration.




A new stabilizing algorithm providing more stability than ever before and extremely precise induction devices combine to create effortless attitude control. With these in place, the S1000 needs no extra equipment installation or wiring, making it easier to get shooting faster.

  • MPN
    Zenmuse Z15-GH4
  • Compatible
    Panasonic GH3/GH4


Built-In Functions
  1. Three Modes
    · Orientation-locked
    · Non orientation-locked
    · FPV mode (Reset)
  2. Built-in independent IMU module
  3. DJI-designed servo drives
  4. HDMI HD/AV module
  5. Wireless video transmission module support
  6. Camera shutter control support
  7. Wide range voltage input support
  8. S-Bus/PPM Receiver support


Supported Camera
Panasonic GH4/GH3
Supported Lens Currently
GCU Input Power
4S~12S LiPo (Recommend 6S if used with the S800 EVO or S1000)
Control Requirement
Minimum of four spare receiver channels
Assistant Software System Requirement
Windows XP SP3; Windows 7; Windows 8 (32 or 64 bit)

Mechanical& Electrical Characteristics

Working Current
Static current: 200mA (@25V)

Dynamic current: 400mA (@25V)

Locked-rotor current: 4A (@25V)
Operating Temperature
-10°C ~ 50°C
GCU Weight
GCU Dimensions
64.2 mm ×34.1mm ×19.5mm

Working Performance

Load Weight (Reference Value)
690g(@Panasonic GH4 with OLYMPUS M.ZUIKO DIGITAL ED 12mm f2.0, Battery and SD Card)
Controlled Angle Accuracy
Maximum Controlled Rotation Speed
Pan axis: ±130°/s

Tilt axis: ±130°/s

Roll axis: ±30°/s
Pan axis control: ±360° continuous rotation
Tilt axis control: +50°/-140°
Roll axis control: ±40°

Note*: Gimbal’s Maximum Controlled Rotation Speed corresponds to TX stick input pushed to 100% end-points.


Supported Camera Panasonic GH4/GH3
Supported Lens Olympus M.ZUIKO DIGITAL ED 12mm f/2.0 Lens
Warning! Using other lenses may damage the servo motors
Control Requirements At least four spare receiver channels (or use dedicated transmitter for two person operation)
Software Requirements For Assistant Software: Windows 8, 7, XP SP3 -- 32 or 64-bit
Working Current Static Current: 200 mA at 25 V
Dynamic Current: 400 mA at 25 V
Locked-Rotor Current: 4 A at 25 V
GCU BEC Output 10 A at 12 V
Transmit Power GCU Wireless Video Transmission: 1 A at 12 V
Controlled Angle Accuracy ±0.05°
Maximum Controlled Rotation Speed Pan Axis: ±130°/s
Tilt Axis: ±130°/s
Roll Axis ±30°/s
Controlled Rotation Range Pan Axis Control: ±360°
Tilt Axis Control: +50° / -140°
Roll Axis Control: ±40°
Power Requirements GCU: 4S to 12 S lithium polymer (6S recommended for S800 EVO and S1000)
Operating Temperature 14 to 122°F / -10 to 50°C
Dimensions GCU: 2.5 x 1.4 x 0.8" / 64.2 x 34.1 x 19.5 mm
Weight Gimbal: 2.7 lb / 1.2 kg
GCU: 2.2 oz / 63 g


Packaging Info
Package Weight 5.1 lb
Box Dimensions (LxWxH) 9.9 x 9.4 x 9.4"


  • Zenmuse Z15-GH4 (HD) Release Notes
  • Zenmuse Z15-GH4 (HD) User Manual v1.6
  • Zenmuse Assistant Software v1.4


  • DJI WIN Driver Installer
  • * Important Note:
    As DJI Innovations has no control over use, setup, final assembly, modification (including use of non-specified DJI parts or misuse, no liability shall be assumed nor accepted for any resulting damage or injury. By the act of use, setup or assembly, the user accepts all resulting liability.
DJI Zenmuse Z15-GH4 HD 3-Axis Gimbal for Panasonic GH3/GH4


  • Gimbal Control Unit
  • Lens Retaining Ring
  • 4 x Mounting Bracket
  • Mounting Board for Receive
  • Cable Clamp
  • 2 x Camera Mount Screw
  • Lens Retaining Ring Screw
  • Screw Package
  • 2 x 10-Pin to 9-Pin Cable
  • 7-Pin Cable
  • 2 x 8-Pin to 6-Pin Cable
  • Camera Shutter Control Cable
  • Servo Cable Package
  • AV Video Power Cable
  • iOSD Mark II Cable
  • Micro-USB Cable
  • CAN-Bus Cable
  • HDMI Cable Camera
  • Spare Package
  • Limited 1-Year Warranty