The CTS-3000 series features onboard software that simplifies staking. An extended keyboard enables easy operation and data input. The system software can also be operated with a hand-held data collector, like Topcon's FC-100. Reflectorless measurement capabilities up to 250m (820 ft.) and a prism type range of 3,000m (9842 ft.) to a single standard size prism provide the range needed to cover most job sites.

CTS-3000 Features:

  -CTS - Contractors Total Station

  -Layout and offset measurement made easy

  -Reflectorless measurement to 250m

  -Easy on-board software or use with hand-held collector

  -Class 1, eye-safe laser

     The pinpoint reflectorless measurement function will increase the productivity and flexibility of your measurements. Use a prism or not, it’s up to you. Utilize the CTS series to help you keep control on the job site. Replace lost or disturbed stakes, or use it to make spot measurements for elevations.

Specifications:

Telescope
Length:  150 Millimeters
Objective Lens Diameter:  45mm(EDM:50mm)
Magnification:  30X
Image:  Erect
Field of View:  1°30’
Resolve Power:  2.8 "
Min. Focus Distance:  1.3 meters

Measurement Range
1 Prism:  9900 ft, 3000 meters
Mini Prism:  6.6 - 4,920 ft, 2 - 1,500 meters
Pin Pole Prism:  6.6 - 8,200 ft, 2 - 2,500 meters
Non-Prism Mode:  5 - 820 ft, 1.5 - 250 meters

Measuring Accuracy
Prism Mode:  ±(3mm+2ppmxD*)m.s.e. fine, ±(10mm+2ppmxD*)m.s.e. coarse Non-Prism Mode:  ±(10mm) m.s.e. fine(3-25m), ±(3mm+2ppm) m.s.e. fine(25m or more), ±(10mm+2ppm) m.s.e. coarse
Minimum Reading:  0.2mm(0.001ft.) / 1mm(0.005ft) fine, 1mm(0.005ft) / 10mm(0.02ft.) coarse, 10mm(0.02ft.) tracking
Measurement Time:  1mm:1.2 sec.(Initial 3.0 sec.)/0.2mm:3.0 sec (Initial 4.0 sec.) fine, 0.5 sec.(Initial 2.5 sec.) coarse, 0.3 sec.(Initial 2.5 sec.) tracking

Angle Measurement
Method:  Absolute
Detection:  up to 2 sides horizontal, up to 2 sides vertical
Minimum Reading:  1"/5" arc sec, 0.2/1 mgon
Accuracy:  up to 2" arc sec, 0.6 mgon
Diameter of Circle:  71 Millimeters

Tilt Correction
Type:  Single or Dual Axis
Compensating Range:  ± 3’
Correction Unit:  1" arc sec, 0.1 mgon

Environmental
Circular Level Sensitivity:  10’ /2mm
Plate Level Sensitivity:  30" /2mm
Optical Plummet:  3x Magnification, 0.5m to infinity Focusing Range, Erect Image, 5° Field of View
Laser Plummet:  LD (Visible Laser) light source, 633nm wave length, 1mW Maximum output, Class 2 (IE Publication) / Class II (FDA/BHR 21 CFR 1040) class
Laser Pointer:  LD (Visible Laser) light source, 690nm wave length, 1mW Maximum   output, Class 2 (IE Publication) / Class II (FDA/BHR 21 CFR 1040) class, provided point guide
Dimensions (HxWxL):  13.2 x 7.2 x 6.9 inches, 336 x 184 x 174 Millimeters
Instrument Weight(with battery):  11.4 pounds, 5.2 kg
Case Weight:  7.1 pounds, 3.2 kg
Dust/Water Protection:  IP66 rating
Operating Temperature:  -20° to +50° Celsius, -4° to +122° Fahrenheit

Power
Source:  NiMH Battery BT-52Q
Output Voltage:  DC7.2 Volts
Capacity:  2700 mAh
Approximate Battery Life:  4.2 hours including distance measurement, 45 hours Angle measurement only

Battery Charger
ID:  BC-27
Input Voltage:  AC100-240 Volts
Frequency:  50/60 Hertz
Recharging Time:  1.8 Hours
Operating Temperature:  +10° to +40° Celsius, +50° to +104° Fahrenheit

Other
Bluetooth Wireless Capability:  no